POSITAL
Incorrect email or password. Please try again.
Print Send as Email

TILTIX Inclinometer

ACS-020-2-AC00-HE3-PQ

POSITAL Measuring Tools & Sensors Analog - Current 4 – 20 mA, 2 Axes - ± 20°, Static / Accelerometer, CE, IP67, Fibre-Reinforced Plastic, 0.10°, 0.01°, Connector - M12 (8 pin) Available 0
picture-m-1p3-47x52-pq.jpg
General Specifications
Application2-Axes Position Monitoring and Leveling
Measurement Range± 20°
Absolute Accuracy±0.10°
Resolution0.01°
Cycle Time Base Sensor500 µs
Device OrientationHorizontal
Electrical Specifications
Supply Voltage10 – 30 VDC
Power Consumption (no load)≤ 0.7 W
EMC: Emitted InterferenceDIN EN 61000-6-4
EMC: Noise ImmunityDIN EN 61000-6-2
Reverse Polarity ProtectionYes
Short Circuit ProtectionYes
MTTF400 years @ 40 °C
Environmental Specifications
Operating Temperature-40 °C (-40 °F) - +85 °C (+185 °F)
Storage Temperature-40 °C (-40 °F) – +85 °C (+185 °F)
Temperature Gradient0.004°/ K
Protection ClassIP66/IP67
Shock Resistance≤ 100 g (half sine 6 ms, EN 60068-2-27)
Vibration Resistance1.5 mm (10 Hz – 58 Hz) & ≤ 20 g (58 Hz to 2000 Hz)
Mechanical Specifications
Housing MaterialFibre-Reinforced PBT (Polybutylene Terephthalate)
Potting MaterialNone
Weight45 g (0.10 lb)
Interface
InterfaceAnalog Current 4 – 20 mA
Settling Timemin 30 ms; default 200 ms (dependent on filter settings)
Output TypeCurrent 4 – 20 mA
Max Load Resistance270 Ω @ 10 V DC (500 Ω @ 15 V DC)
Linearity± 0.02%

Electrical Connection
Connection TypeConnector M12 (8 pin)
ConnectorM12, Male, 8 pin, a coded
Product Life Cycle
Product Life CycleNew
Certification
ApprovalCE
Connection Plan
SIGNALPIN NUMBER
Power Supply1
GND4
X-Axis, Current Output5
Y-Axis, Current Output7
Set16
Do Not Connect8
Do Not Connect2
Do Not Connect3
Dimensional Drawing
drawing-1p3-47x52-pq.png
2D Drawing

All dimension in [inch] mm. This drawing and the information contained is for general presentation purposes only. Please refer to the "Download" section for detailed technical drawings.

© FRABA B.V., All rights reserved. We do not assume responsibility for technical inaccuracies or omissions. Specifications are subject to change without notice.