Supply Voltage | 4.75 – 30 VDC |
Power Consumption | ≤ 1.0 W |
Start-Up Time | < 1 s |
Weight | 910 g (2.01 lb) |
Protection Class | IP64 / IP65 |
EMC: Emitted Interference | DIN EN 61000-6-4 |
EMC: Noise Immunity | DIN EN 61000-6-2 |
Max Temperature | +80 °C (+176 °F) |
Min Temperature | -20 °C (-4 °F) |
Measuring Length | 7.50 m (24.61') |
Length per Revolution | 333.3 mm |
Wire Material | Coated Polyamide Stainless Steel |
Wire Diameter | 0.45 mm |
Housing Material | Steel |
Draw Wire Housing Material | Plastic |
Max. Angular Acceleration | 1.5 g |
Max Extension Force | 13.0 N |
Min Retraction Force | 7.0 N |
Actuation Lifetime | 0.5 mio Cycles (Estimated based on ideal conditions) |
Wire Mounting | Wireclip |
Max. Wire Exit Angle | ±3° |
Technology | Magnetic (≤ 0.09°) |
Accuracy | ±0.05 % Full Scale Output |
Repeatability | ±0.01 % FSO |
Resolution Singleturn | Incremental |
Approx. Linear Resolution | 0.1 mm/pulse (Default) |
Pulses per Revolution | 03333 |
Duty Cycle | 180° ± 27° (Speed > 100RPM) |
Phase Angle | 90° ± 14° (Speed > 100RPM) |
Interface | Programmable Incremental |
Programming Functions | PPR (1-16384), Output, Counting Direction |
Configuration Tool | UBIFAST Configuration Tool (Version ≥ 1.6.3) |
Programmable Output | Push-Pull (HTL) or RS422 (TTL) |
Output Driver | Push-Pull (HTL) |
Output Voltage High Level Push-Pull (HTL) | > 4 V @ 4.75-9 V Supply Voltage > V-3 V @ 9-30 V Supply Voltage |
Output Voltage Low Level Push-Pull (HTL) | < 0.5 V |
Output Voltage High Level RS422 (TTL) | > 4 V |
Output Voltage Low Level RS422 (TTL) | < 0.5 V |
Current Consumption | ≤140mA @ 5V DC, ≤70mA @ 10V DC, ≤40mA @ 24V DC |
Min. Load Resistance | 120 Ω |
Reverse Polarity Protection | Yes |
Short Circuit Protection | Yes |
MTTF | 280 years @ 40 °C |
Connection Orientation | Radial |
Connection Orientation (w.r.t Draw Wire) | Radial 9 |
Connector | M12, Male, 8 pin, a coded |
Product Life Cycle | Exiting |
Signal | Pin Number |
---|---|
A | 3 |
/A | 4 |
B | 5 |
/B | 6 |
Z | 7 |
/Z | 8 |
Power Supply | 2 |
GND | 1 |
Shielding | Connector housing |