IXARC Absolute Rotary Encoder
UCE-AV003-0013-F10S-CRW
POSITAL
Measuring Tools & Sensors
Analog - Voltage 0.5-4.5V, Singleturn, 13 bit (8192 Steps; 0.044°), IP67, Aluminum / Steel, Solid Shaft - Clamping, ø 78 mm (3.07"), ø 10 mm (0.39"), Cable - Radial 1 m, ≤ 0.09° (Magnetic - Hall Effect), ATEX - Zone 1 & 21 (Oil+Gas)
Available
0
Electrical Data | |
Supply Voltage | 8 – 32 VDC |
Current Consumption | Typical 15 mA @24V (no load) |
Start-Up Time | <500 ms |
Min. Load Resistance | 5 kΩ |
Analog Accuracy | @ 10 V = ±10 mV (with an ideal power supply) |
Linearity | 0.15% |
Settling Time | 32 ms (from min value to max value jump) |
Reverse Polarity Protection | Yes |
Short Circuit Protection | Yes |
EMC: Emitted Interference | DIN EN 61000-6-4 |
EMC: Noise Immunity | DIN EN 61000-6-2 |
MTTF | 300.9 years @ 40 °C |
Sensor | |
Technology | Magnetic |
Resolution Singleturn | 13 bit |
Resolution Multiturn | 0 bit |
Accuracy (INL) | ±0.0878° (≤ 12 bit) |
Code | Analog Voltage 0.5 – 4.5 V |
Minimum Measurement Range | 0 – 11.25° |
Resolution of Output | Max. 13 bits over entire measuring range (Fractional Turns - Resolution decreases less than 13 bits when measuring range is less than 90 degrees) |
Multiturn Range | Singleturn |
Environmental Specifications | |
Protection Class (Shaft) | IP66/IP67 |
Protection Class (Housing) | IP66/IP67 |
Operating Temperature | -30 °C fixed (-22 °F), -5 °C flexible (+23 °F) - +70 °C (+158 °F) |
Humidity | 98% RH, no condensation |
Mechanical Data | |
Connection Cap Material | Aluminum |
Housing Material | Aluminum |
Housing Coating | Eloxide |
Flange Type | Clamp, ø 78 mm, ATEX |
Flange Material | Aluminum |
Shaft Type | Solid, Single Flat, Length = 20 mm |
Shaft Diameter | ø 10 mm (0.39") |
Rotor Inertia | ≤ 35 gcm² [≤ 0.2 oz-in²] |
Friction Torque | ≤ 5 Ncm @ 20 °C, (7.1 oz-in @ 68 °F) |
Max. Permissible Mechanical Speed | ≤ 3000 1/min |
Shock Resistance | ≤ 100 g (half sine 11 ms, EN 60068-2-27) |
Vibration Resistance | ≤ 10 g (10 Hz – 2000 Hz, EN 60068-2-6) |
Length | 118 mm (4.65") |
Weight | 1210 g (2.67 lb) |
Electrical Connection | |
Connection Orientation | Radial |
Connection Type | Cable / Connector |
Cable Length | 1 m [39"] |
Material / Type | PVC |
Minimum Bend Radius | 50 mm (2") fixed, 100 mm (4") flexing |
Certification | |
Approval | CE + ATEX Zone 1 & 21 (Oil+Gas) |
Product Life Cycle | |
Product Life Cycle | New |
If the drawings are not available please refer to the "Download" section.
The picture and drawing are for general presentation purposes only. All dimension in [inch] mm.
© FRABA B.V., All rights reserved. We do not assume responsibility for technical inaccuracies or omissions. Specifications are subject to change without notice.