POSITALMeasuring Tools & SensorsBiSS C, Multiturn - 16 bit (65536 rev), 17 bit (131072 Steps; 0.0025°), IP64 / IP65, Aluminum / Steel, Blind Hollow Shaft - BC ø 42.5 mm, 1xTether, ø 36 mm (1.42"), ø 6.35 mm (1/4"), Connector - PCB Connector, Male, JST, ≤ 0.09° (Magnetic - TMR), CE / ULAvailable0
This product is a prototype
Interface
Interface
BiSS C
Interface Cycle Time
≥ 50 µs
Programming Functions
Via config pin: Wiegand sensor test, preset value and multiturn reinitialization, resolution programmable
Outputs
Output Driver
RS422
Electrical Data
Supply Voltage
4.75 – 15 VDC
Current Consumption
Typical 32 mA, max 35 mA @5V DC
Power Consumption
≤ 0.3 W
Start-Up Time
< 100 ms
Clock Input
RS422
Clock Frequency
80 kHz - 10 MHz
Max. Permissable Electric Speed
12000 1/min
Reverse Polarity Protection
Yes
Short Circuit Protection
Yes
EMC: Emitted Interference
DIN EN 61000-6-4, customer shall verify in complete system
EMC: Noise Immunity
The kit encoder is a sub-assembly and not to be considered an independent system. Therefore, compliance with CE requirements has to be ensured by the integrator for the overall set-up.
MTTF
20 years @ 105 °C
Sensor
Technology
Magnetic TMR
Resolution Singleturn
17 bit
Resolution Multiturn
16 bit
Multiturn Technology
Self powered magnetic pulse counter (no battery, no gear)
Accuracy (INL)
±0.0878° (≤ 12 bit)
Cycle Time Base Sensor
50 µs
Environmental Specifications
Protection Class (Shaft)
IP65
Protection Class (Housing)
IP30
Operating Temperature
-40 °C (-40 °F) - +105 °C (221 °F)
Humidity
98% RH, no condensation
Mechanical Data
Housing Material
Steel
Housing Coating
Cathodic corrosion protection (>720 hrs salt spray resistance)
Flange Type
Blind Hollow, ø 36 mm / ø 42 mm
Flange Material
Aluminum
Flange Coating
No Coating
Shaft Type
Blind Hollow, Depth = 16 mm
Shaft Diameter
ø 6.35 mm (1/4")
Shaft Material
Stainless Steel V2A (1.4305, 303)
Friction Torque
≤ 3 Ncm @ 20 °C (4.2 oz-in @ 68 °F)
Max. Permissible Mechanical Speed
≤ 12000 1/min
Shock Resistance
≤ 100 g (half sine 6 ms, EN 60068-2-27)
Permanent Shock Resistance
≤ 10 g (half sine 16 ms, EN 60068-2-29)
Vibration Resistance
≤ 10 g (10 Hz – 1000 Hz, EN 60068-2-6)
Length
31,6 mm (1.24")
Maximum Axial / Radial Misalignment
Static ± 0.3 mm /± 0.5 mm; Dynamic ± 0.1 mm /± 0.2 mm
