POSITAL
Incorrect email or password. Please try again.
EN
Print Send as Email

IXARC Absolute Rotary Encoder

OCD-DPC1B-1212-B150-H3P

POSITAL Measuring Tools & Sensors Profibus DP, Multiturn - 12 bit (4096 rev), 12 bit (4096 Steps; 0.088°), IP64 / IP65, Aluminum / Steel, Blind Hollow Shaft - BC ø 63 mm, ø 58 mm (2.28"), ø 15 mm (0.59"), Connection Cap - 3 x Cable Gland, ≤ 0.02° (Optical), CE / UL Available 0
picture-bx-5-fbx-nn-3px.jpg
Interface
InterfaceProfibus DP
ProfileDPV0, DPV1 and DPV2 Class 2 (EN50170 + EN50254)
DiagnosticsMemory
Manual FunctionsAddress selector switch 0-99 and terminal resistor (with connection cap)
FeaturesRound Axis
Transmission Rate≤12 Mbaud
Interface Cycle Time≥ 1 ms
Programming FunctionsResolution, gearing factor (physical resolution) , velocity scaling + filter, preset (zero point), counting direction, limit switches , node number, teach-in, diagnosis
Outputs
Output DriverProfibus Data Interface, galvanically isolated via opto-couplers
Electrical Data
Supply Voltage10 – 30 VDC
Current Consumption≤ 115 mA @ 10 V DC, ≤ 50 mA @ 30 V DC
Power Consumption≤ 1.5 W
Start-Up Time< 1 s
Reverse Polarity ProtectionYes
Short Circuit ProtectionYes
EMC: Emitted InterferenceDIN EN 61000-6-4
EMC: Noise ImmunityDIN EN 61000-6-2
MTTF109 years @ 40 °C
Sensor
TechnologyOptical
Resolution Singleturn12 bit
Resolution Multiturn12 bit
Multiturn TechnologyMechanical Gearing (no Battery)
Accuracy (INL)±0.0220° (14 – 16 bit), ±0.0439° (≤13 bit)
CodeBinary
Environmental Specifications
Protection Class (Shaft)IP65
Protection Class (Housing)IP65
Operating Temperature-40 °C (-40 °F) - +85 °C (+185 °F)
Storage Temperature-40 °C (-40 °F) – +85 °C (+185 °F)
Humidity98% RH, no condensation
Mechanical Data
Connection Cap MaterialAluminum
Housing MaterialSteel
Housing CoatingWet coating (RAL 9006 White Aluminium) + Cathodic corrosion protection (>720 h salt spay resistance)
Flange TypeBlind Hollow, ø 58 mm (B)
Flange MaterialAluminum
Shaft TypeBlind Hollow, Depth = 30 mm
Shaft Diameterø 15 mm (0.59")
Shaft MaterialStainless Steel V2A (1.4305, 303)
Rotor Inertia≤ 30 gcm² [≤ 0.17 oz-in²]
Friction Torque≤ 3 Ncm @ 20 °C (4.2 oz-in @ 68 °F)
Max. Permissible Mechanical Speed≤ 12000 1/min
Shock Resistance≤ 100 g (half sine 6 ms, EN 60068-2-27)
Permanent Shock Resistance≤ 10 g (half sine 16 ms, EN 60068-2-29)
Vibration Resistance≤ 10 g (10 Hz – 1000 Hz, EN 60068-2-6)
Length99 mm (3.90")
Weight460 g (1.01 lb)
Maximum Axial / Radial MisalignmentStatic ± 0.3 mm /± 0.5 mm; Dynamic ± 0.1 mm /± 0.2 mm
Electrical Connection
Connection OrientationRadial
Connection Type3 x Cable Gland
Connection Cap TypeRemovable for easy replacing encoder without new installation of cable, Rotary switches with visible node number, No active components, Terminal resistor switch cut the outgoing bus too, Big spring clips
Certification
ApprovalCE
Product Life Cycle
Product Life CycleEstablished
Connection Plan
SIGNALPIN NUMBER
Bus line B (Bus in)B
Bus line A (Bus in)A
GND−
Power Supply+
Bus line B (Bus out)B
Bus line A (Bus out)A
GND−
Power Supply+
Connector-View on Encoder
Dimensional Drawing

If the drawings are not available please refer to the "Download" section.

The picture and drawing are for general presentation purposes only. All dimension in [inch] mm.

© FRABA B.V., All rights reserved. We do not assume responsibility for technical inaccuracies or omissions. Specifications are subject to change without notice.