TILTIX Inclinometer
ACE-080-2-C902-H02-CW
POSITAL Measuring Tools & Sensors J1939, 2 Axes - ± 80°, Static / Accelerometer, ATEX - Zone 1 & 21 (Oil+Gas), IP65 / IP67, Aluminum, 0.10°, 0.01°, Cable - 1 m Available 0
| General Specifications | |
| Application | 2-Axes Position Monitoring and Leveling |
| Measurement Range | ± 80° |
| Absolute Accuracy | ±0.10° (within +/-60° range) |
| Resolution | 0.01° |
| Electrical Specifications | |
| Supply Voltage | 10 – 30 VDC |
| Current Consumption | ≤ 65 mA @ 10 V DC, ≤ 60 mA @ 24 V DC |
| EMC: Emitted Interference | DIN EN 61000-6-4 |
| EMC: Noise Immunity | DIN EN 61000-6-2 |
| Reverse Polarity Protection | Yes |
| Short Circuit Protection | Yes |
| MTTF | 350 years @ 40 °C |
| Environmental Specifications | |
| Operating Temperature | -40 °C (-40 °F) - +80 °C (+176 °F) |
| Storage Temperature | -40 °C (-40 °F) – +85 °C (+185 °F) |
| Temperature Gradient | 0.004°/ K |
| Protection Class | IP65/IP67 |
| Shock Resistance | ≤ 100 g (half sine 6 ms, EN 60068-2-27) |
| Vibration Resistance | 1.5 mm (10 Hz – 58 Hz) & ≤ 20 g (58 Hz to 2000 Hz) |
| Mechanical Specifications | |
| Housing Material | Aluminum |
| Potting Material | PUR (Polyurethane) |
| Weight | 350 g (0.77 lb) |
| Interface | |
| Interface | J1939 |
| Settling Time | 150 ms |
| Output Driver | Transceiver (ISO 11898), Galvanically Isolated by Opto-Coupl |
| Profile | DS-410 |
| Transmission Rate | 125 kBaud, 250 kBaud, 500 kBaud |
| Default Transmission Rate | 250 kBaud |
| Default Node ID | 1h |
| Default PGN | PGN 65283 (Pitch, Roll) |
| Electrical Connection | |
| Connection Type | Cable 1 m |
| Minimum Bend Radius | 50 mm (2") fixed, 100 mm (4") flexing |
| Product Life Cycle | |
| Product Life Cycle | New |
| Certification | |
| Approval | CE + ATEX Zone 1 & 21 (Oil+Gas) |
| Connection Plan | |
| SIGNAL | CABLE COLOR |
| Power Supply | Red |
| GND | Yellow |
| CAN High | White |
| CAN Low | Brown |
| CAN GND | Green |
| Not Connected | Blue |
| Not Connected | Gray |
| Not Connected | Pink |
| Shielding | Shield |
All dimension in [inch] mm. This drawing and the information contained is for general presentation purposes only. Please refer to the "Download" section for detailed technical drawings.
© FRABA B.V., All rights reserved. We do not assume responsibility for technical inaccuracies or omissions. Specifications are subject to change without notice.