POSITAL
Incorrect email or password. Please try again.
Print Send as Email

TILTIX Inclinometer

ACS-120-1-SV20-VH2-PM

POSITAL Measuring Tools & Sensors Analog - Voltage 0-10 V + RS232, 1 Axis - 120°, Static / Accelerometer, CE, IP68 / IP69K, Aluminum, 0.10°, 0.01°, Connector - M12 (8 pin) Available 0
This is a discontinued product!
picture-m-1a3-59x83-pq.jpg
General Specifications
Application1-Axis Position Monitoring and Leveling
Measurement Range120°
Absolute Accuracy±0.10°
Resolution0.01°
Device OrientationVertical
Electrical Specifications
Supply Voltage10 – 30 VDC
Power Consumption (no load)≤ 0.7 W
EMC: Emitted InterferenceDIN EN 61000-6-4
EMC: Noise ImmunityDIN EN 61000-6-2
Reverse Polarity ProtectionYes
Short Circuit ProtectionYes
MTTF400 years @ 40 °C
Environmental Specifications
Operating Temperature- +85 °C (+185 °F)
Storage Temperature-40 °C (-40 °F) – +85 °C (+185 °F)
Temperature Gradient0.004°/ K
Protection ClassIP68/IP69K
Shock Resistance≤ 100 g (half sine 6 ms, EN 60068-2-27)
Vibration Resistance1.5 mm (10 Hz – 58 Hz) & ≤ 20 g (58 Hz to 2000 Hz)
Mechanical Specifications
Housing MaterialAluminum
Potting MaterialPUR (Polyurethane)
Weight200 g (0.44 lb)
Interface
InterfaceAnalog Voltage 0-10 V + RS232
Teach InZero Positioning, Inverse Direction, Elevation Range Programming
Settling Time125 ms
Output TypeVoltage 0 – 10 V
Min Load Resistance5 kΩ
Transmission RateRS232: min. 1200 Baud; max. 115200 Baud
Default Transmission RateRS232: 9600 Baud
Linearity± 0.02%

Electrical Connection
Connection TypeConnector M12 (8 pin)
ConnectorM12, Male, 8 pin, a coded
Product Life Cycle
Product Life CycleDiscontinued
Certification
ApprovalCE + cULus
Connection Plan
SIGNALPIN NUMBER
Power Supply1
GND4
Z-Axis, Voltage Output5
Set16
Set28
RxD2
TxD3
Not Connected7
Dimensional Drawing
2D Drawing

All dimension in [inch] mm. This drawing and the information contained is for general presentation purposes only. Please refer to the "Download" section for detailed technical drawings.

© FRABA B.V., All rights reserved. We do not assume responsibility for technical inaccuracies or omissions. Specifications are subject to change without notice.