TILTIX Inclinometer
ACS-270-1-AV10-VE3-PQ
POSITAL Measuring Tools & Sensors Analog - Voltage 0 – 5 V, 1 Axis - 270°, Static / Accelerometer, CE, IP67, Fibre-Reinforced Plastic, 0.10°, 0.01°, Connector - M12 (8 pin) Available 0
| General Specifications | |
| Application | 1-Axis Position Monitoring and Leveling |
| Measurement Range | 270° |
| Absolute Accuracy | ±0.10° |
| Resolution | 0.01° |
| Cycle Time Base Sensor | 500 µs |
| Device Orientation | Vertical |
| Electrical Specifications | |
| Supply Voltage | 10 – 30 VDC |
| Power Consumption (no load) | ≤ 0.7 W |
| EMC: Emitted Interference | DIN EN 61000-6-4 |
| EMC: Noise Immunity | DIN EN 61000-6-2 |
| Reverse Polarity Protection | Yes |
| Short Circuit Protection | Yes |
| MTTF | 400 years @ 40 °C |
| Environmental Specifications | |
| Operating Temperature | -40 °C (-40 °F) - +85 °C (+185 °F) |
| Storage Temperature | -40 °C (-40 °F) – +85 °C (+185 °F) |
| Temperature Gradient | 0.004°/ K |
| Protection Class | IP66/IP67 |
| Shock Resistance | ≤ 100 g (half sine 6 ms, EN 60068-2-27) |
| Vibration Resistance | 1.5 mm (10 Hz – 58 Hz) & ≤ 20 g (58 Hz to 2000 Hz) |
| Mechanical Specifications | |
| Housing Material | Fibre-Reinforced PBT (Polybutylene Terephthalate) |
| Potting Material | None |
| Weight | 45 g (0.10 lb) |
| Interface | |
| Interface | Analog Voltage 0 – 5 V |
| Settling Time | min 30 ms; default 200 ms (dependent on filter settings) |
| Output Type | Voltage 0 – 5 V |
| Min Load Resistance | 5 kΩ |
| Linearity | ± 0.02% |
| Electrical Connection | |
| Connection Type | Connector M12 (8 pin) |
| Connector | M12, Male, 8 pin, a coded |
| Product Life Cycle | |
| Product Life Cycle | New |
| Certification | |
| Approval | CE |
| Connection Plan | |
| SIGNAL | PIN NUMBER |
| Power Supply | 1 |
| GND | 4 |
| Z-Axis, Voltage Output | 5 |
| Set1 | 6 |
| Do Not Connect | 8 |
| Do Not Connect | 2 |
| Do Not Connect | 3 |
| Do Not Connect | 7 |
All dimension in [inch] mm. This drawing and the information contained is for general presentation purposes only. Please refer to the "Download" section for detailed technical drawings.
© FRABA B.V., All rights reserved. We do not assume responsibility for technical inaccuracies or omissions. Specifications are subject to change without notice.