TILTIX Inclinometer
AGS030-2-SV1-H0-ARW
POSITAL Measuring Tools & Sensors Analog - Voltage 0.5-4.5 V + RS232, 2 Axes - ± 30°, Fluid Cell, CE, IP67, Aluminum, 0.02°, 0.01°, Cable - 10 m Available 0This is a discontinued product!
![picture-f-1a3-70x84-cw.jpg](/media/posital_fsimg/picture-f-1a3-70x84-cw.jpg)
General Specifications | |
Application | 2-Axes Position Monitoring and Leveling |
Measurement Range | ± 30° |
Absolute Accuracy | ±0.02° |
Resolution | 0.01° |
Electrical Specifications | |
Supply Voltage | 10 – 30 VDC |
Current Consumption | ≤ 100 mA @5V, ≤ 45 mA @10V, ≤ 25 mA @24V |
EMC: Emitted Interference | DIN EN 61000-6-4 |
EMC: Noise Immunity | DIN EN 61000-6-2 |
Reverse Polarity Protection | Yes |
Short Circuit Protection | Yes |
MTTF | 300 years |
Environmental Specifications | |
Operating Temperature | -30 °C fixed (-22 °F), -5 °C flexible (+23 °F) - +80 °C (+176 °F) |
Storage Temperature | -40 °C (-40 °F) – +85 °C (+185 °F) |
Temperature Gradient | 0.003°/ K |
Protection Class | IP66/IP67 |
Shock Resistance | ≤ 300 g (half sine 6 ms, EN 60068-2-27) |
Vibration Resistance | 10 – 150 Hz, 2.5 mm amplitude, 5 g const. Acceleration |
Mechanical Specifications | |
Housing Material | Aluminum |
Weight | 670 g (1.48 lb) |
Interface | |
Interface | Analog Voltage 0.5-4.5 V + RS232 |
Output Type | Voltage 0.5 – 4.5 V |
Output Driver | RS232 |
Min Load Resistance | 300 Ω |
Transmission Rate | RS232: min. 2400 Baud; max. 57600 Baud |
Default Transmission Rate | RS232: 9600 Baud |
Linearity | ± 0.02% |
Electrical Connection | |
Connection Type | Cable 10 m |
Cable Length | 10 m [394"] |
Wire Cross Section | 0.14 mm² / AWG 26 |
Material / Type | PVC |
Cable Diameter | 6 mm (0.24 in) |
Minimum Bend Radius | 40 mm (1.57") fixed, 80 (3.15") flexing |
Product Life Cycle | |
Product Life Cycle | Discontinued |
All dimension in [inch] mm. This drawing and the information contained is for general presentation purposes only. Please refer to the "Download" section for detailed technical drawings.
© FRABA B.V., All rights reserved. We do not assume responsibility for technical inaccuracies or omissions. Specifications are subject to change without notice.