TILTIX Inclinometer
AKS-180-E-CA01-HK2-PV
POSITAL Measuring Tools & Sensors CANopen, Pitch, Roll - ± 85°/± 180° horizontal mounting, Dynamic / Accelerometer + Gyroscope, CE, IP68 / IP69K, Aluminum, 0.30°, 0.01°, Connector - M12 (5 pin) Available 0
| General Specifications | |
| Application | Dynamic Inclinometer 2-Axes with Pitch and Roll |
| Measurement Range | Pitch ± 85°, Roll ± 180° |
| Absolute Accuracy | ±0.30° |
| Resolution | 0.01° |
| Repeatability | ≤0.05° |
| Dynamic Accuracy | ±0.50° |
| Cycle Time Base Sensor | 5 ms |
| Hysteresis | ≤0.05° |
| Device Orientation | Horizontal |
| Electrical Specifications | |
| Supply Voltage | 9 – 30 VDC |
| Current Consumption | ≤ 65 mA @ 10 V DC, ≤ 60 mA @ 24 V DC |
| EMC: Emitted Interference | DIN EN 61000-6-4 |
| EMC: Noise Immunity | DIN EN 61000-6-2 |
| Reverse Polarity Protection | Yes |
| Short Circuit Protection | Yes |
| MTTF | 260 years @ 40 °C |
| Environmental Specifications | |
| Operating Temperature | -40 °C (-40 °F) - +75 °C (+167 °F) |
| Storage Temperature | -40 °C (-40 °F) – +85 °C (+185 °F) |
| Temperature Gradient | 0.008°/ K |
| Protection Class | IP68/IP69K |
| Shock Resistance | ≤ 100 g (half sine 6 ms, EN 60068-2-27) |
| Vibration Resistance | 1.5 mm (10 Hz – 58 Hz) & ≤ 20 g (58 Hz to 2000 Hz) |
| Mechanical Specifications | |
| Housing Material | Die-Cast Aluminum Alloy |
| Potting Material | PUR (Polyurethane) |
| Weight | 220 g (0.49 lb) |
| Interface | |
| Interface | CANopen |
| Settling Time | 50 ms |
| Output Driver | Transceiver (ISO 11898), Galvanically Isolated by Opto-Coupl |
| Profile | DS-410 |
| Transmission Rate | min. 20 kBaud, max. 1 MBaud |
| Default Transmission Rate | 125 kBaud |
| Default Node ID | 1h |
| Electrical Connection | |
| Connection Type | Connector M12 (5 pin) |
| Connector | M12, Male, 5 pin, a coded |
| Product Life Cycle | |
| Product Life Cycle | Established |
| Certification | |
| Approval | CE + E1 |
| Connection Plan | |
| SIGNAL | PIN NUMBER |
| Power Supply | 2 |
| GND | 3 |
| CAN High | 4 |
| CAN Low | 5 |
| CAN GND | 1 |
All dimension in [inch] mm. This drawing and the information contained is for general presentation purposes only. Please refer to the "Download" section for detailed technical drawings.
© FRABA B.V., All rights reserved. We do not assume responsibility for technical inaccuracies or omissions. Specifications are subject to change without notice.