TILTIX Inclinometer
ACS-090-1-AV20-VE3-PQ
POSITAL Measuring Tools & Sensors Analog - Voltage 0 – 10 V, 1 Axis - 90°, Static / Accelerometer, CE, IP67, Fibre-Reinforced Plastic, 0.10°, 0.01°, Connector - M12 (8 pin) Available 0![picture-m-1p3-47x52-pq.jpg](/media/posital_fsimg/picture-m-1p3-47x52-pq.jpg)
General Specifications | |
Application | 1-Axis Position Monitoring and Leveling |
Measurement Range | 90° |
Absolute Accuracy | ±0.10° |
Resolution | 0.01° |
Cycle Time Base Sensor | 500 µs |
Device Orientation | Vertical |
Electrical Specifications | |
Supply Voltage | 10 – 30 VDC |
Power Consumption (no load) | ≤ 0.7 W |
EMC: Emitted Interference | DIN EN 61000-6-4 |
EMC: Noise Immunity | DIN EN 61000-6-2 |
Reverse Polarity Protection | Yes |
Short Circuit Protection | Yes |
MTTF | 400 years @ 40 °C |
Environmental Specifications | |
Operating Temperature | -40 °C (-40 °F) - +85 °C (+185 °F) |
Storage Temperature | -40 °C (-40 °F) – +85 °C (+185 °F) |
Temperature Gradient | 0.004°/ K |
Protection Class | IP66/IP67 |
Shock Resistance | ≤ 100 g (half sine 6 ms, EN 60068-2-27) |
Vibration Resistance | 1.5 mm (10 Hz – 58 Hz) & ≤ 20 g (58 Hz to 2000 Hz) |
Mechanical Specifications | |
Housing Material | Fibre-Reinforced PBT (Polybutylene Terephthalate) |
Potting Material | None |
Weight | 45 g (0.10 lb) |
Interface | |
Interface | Analog Voltage 0 – 10 V |
Settling Time | min 30 ms; default 200 ms (dependent on filter settings) |
Output Type | Voltage 0 – 10 V |
Min Load Resistance | 5 kΩ |
Linearity | ± 0.02% |
Electrical Connection | |
Connection Type | Connector M12 (8 pin) |
Connector | M12, Male, 8 pin, a coded |
Product Life Cycle | |
Product Life Cycle | New |
Certification | |
Approval | CE |
Connection Plan | |
SIGNAL | PIN NUMBER |
Power Supply | 1 |
GND | 4 |
Z-Axis, Voltage Output | 5 |
Set1 | 6 |
Do Not Connect | 8 |
Do Not Connect | 2 |
Do Not Connect | 3 |
Do Not Connect | 7 |
All dimension in [inch] mm. This drawing and the information contained is for general presentation purposes only. Please refer to the "Download" section for detailed technical drawings.
© FRABA B.V., All rights reserved. We do not assume responsibility for technical inaccuracies or omissions. Specifications are subject to change without notice.