POSITAL
Incorrect email or password. Please try again.
Print Send as Email

TILTIX Inclinometer

ACS-090-2-C901-HE3-PM

POSITAL Measuring Tools & Sensors J1939, 2 Axes - ± 90°, Static / Accelerometer, CE, IP67, Fibre-Reinforced Plastic, 0.10°, 0.01°, Connector - M12 (5 pin) Available 0
This product is a prototype
picture-m-1p3-47x52-pm.jpg
General Specifications
Application2-Axes Position Monitoring and Leveling
Absolute Accuracy±0.10°
Resolution0.01°
Repeatability≤0.05°
Cycle Time Base Sensor500 µs
Electrical Specifications
Supply Voltage10 – 30 VDC
Current Consumption≤ 65 mA @ 10 V DC, ≤ 60 mA @ 24 V DC
EMC: Emitted InterferenceDIN EN 61000-6-4
EMC: Noise ImmunityDIN EN 61000-6-2
Reverse Polarity ProtectionYes
Short Circuit ProtectionYes
MTTF260 years @ 40 °C
Environmental Specifications
Operating Temperature-40 °C (-40 °F) - +85 °C (+185 °F)
Storage Temperature-40 °C (-40 °F) – +85 °C (+185 °F)
Temperature Gradient0.004°/ K
Protection ClassIP66/IP67
Shock Resistance≤ 100 g (half sine 6 ms, EN 60068-2-27)
Vibration Resistance1.5 mm (10 Hz – 58 Hz) & ≤ 20 g (58 Hz to 2000 Hz)
Mechanical Specifications
Housing MaterialFibre-Reinforced PBT (Polybutylene Terephthalate)
Potting MaterialNone
Weight45 g (0.10 lb)
Interface
InterfaceJ1939
Settling Timemin 30 ms; default 200 ms (dependent on filter settings)
Output DriverTransceiver (ISO 11898), Galvanically Isolated by Opto-Coupl
Transmission Rate125 kBaud, 250 kBaud, 500 kBaud
Default Transmission Rate250 kBaud
Default Node IDC0h
Default PGNPGN 61459 (in Accordance with SAE)
Electrical Connection
Connection TypeConnector M12 (5 pin)
ConnectorM12, Male, 5 pin, a coded
Product Life Cycle
Product Life CyclePrototype
Connection Plan
SIGNALPIN NUMBER
Power Supply2
GND3
CAN High4
CAN Low5
CAN GND1
Dimensional Drawing
drawing-1p3-47x52-pm.png
2D Drawing

All dimension in [inch] mm. This drawing and the information contained is for general presentation purposes only. Please refer to the "Download" section for detailed technical drawings.

© FRABA B.V., All rights reserved. We do not assume responsibility for technical inaccuracies or omissions. Specifications are subject to change without notice.