POSITAL
Incorrect email or password. Please try again.
Print Send as Email

TILTIX Inclinometer

AKS-090-2-C903-HK3-PV

POSITAL Measuring Tools & Sensors J1939, 2 Axes - ± 90°, Dynamic / Accelerometer + Gyroscope, CE, IP68 / IP69K, Zinc, 0.30°, 0.01°, Connector - M12 (5 pin) Available 0
This product is a prototype
General Specifications
ApplicationDynamic Inclinometer 2-Axes
Measurement Range± 90°
Absolute Accuracy±0.30°
Resolution0.01°
Repeatability≤0.05°
Dynamic Accuracy±0.50°
Cycle Time Base Sensor5 ms
Hysteresis≤0.05°
Device OrientationHorizontal

Electrical Specifications
Supply Voltage9 – 30 VDC
Current Consumption≤ 65 mA @ 10 V DC, ≤ 60 mA @ 24 V DC
EMC: Emitted InterferenceDIN EN 61000-6-4
EMC: Noise ImmunityDIN EN 61000-6-2
Reverse Polarity ProtectionYes
Short Circuit ProtectionYes
MTTF260 years @ 40 °C
Environmental Specifications
Operating Temperature-40 °C (-40 °F) - +80 °C (+176 °F)
Storage Temperature-40 °C (-40 °F) – +85 °C (+185 °F)
Temperature Gradient0.008°/ K
Protection ClassIP68/IP69K
Shock Resistance≤ 100 g (half sine 6 ms, EN 60068-2-27)
Vibration Resistance1.5 mm (10 Hz – 58 Hz) & ≤ 20 g (58 Hz to 2000 Hz)
Mechanical Specifications
Housing MaterialZinc
Potting MaterialNone
Weight280 g (0.62 lb)
Interface
InterfaceJ1939
Settling Timemin 30 ms; default 200 ms (dependent on filter settings)
Output DriverTransceiver (ISO 11898), Galvanically Isolated by Opto-Coupl
Transmission Rate125 kBaud, 250 kBaud, 500 kBaud
Default Transmission Rate250 kBaud
Default Node IDC0h
Default PGNPGN 65280 (X-Angle, Y-Angle, Acceleration x, Acceleration y) + PGN 65281 (Acceleration z, Gyro x, Gyro y, Gyro z)
Electrical Connection
Connection TypeConnector M12 (5 pin)
ConnectorM12, Male, 5 pin, a coded, with LED
Product Life Cycle
Product Life CyclePrototype
Certification
ApprovalCE + cULus + E1
Connection Plan
SIGNALPIN NUMBER
Power Supply2
GND3
CAN High4
CAN Low5
CAN GND1
Dimensional Drawing
drawing-1z4-59x83-pv.png
2D Drawing

All dimension in [inch] mm. This drawing and the information contained is for general presentation purposes only. Please refer to the "Download" section for detailed technical drawings.

© FRABA B.V., All rights reserved. We do not assume responsibility for technical inaccuracies or omissions. Specifications are subject to change without notice.