Supply Voltage | 8 – 32 VDC |
Start-Up Time | <500 ms |
Weight | 1465 g (3.23 lb) |
Protection Class | IP64 / IP65 |
EMC: Emitted Interference | DIN EN 61000-6-4 |
EMC: Noise Immunity | DIN EN 61000-6-2 |
Max Temperature | +70 °C (+158 °F) |
Min Temperature | -30 °C (-22 °F) |
Measuring Length | 2.00 m (6.56') |
Length per Revolution | 200 mm |
Wire Material | Stainless Steel |
Wire Diameter | 1.35 mm |
Housing Material | Steel |
Draw Wire Housing Material | Anodized Aluminium |
Max. Speed of Wire Displacement | 8.0 m / s |
Max Extension Force | 15.0 N |
Min Retraction Force | 5.0 N |
Actuation Lifetime | 1.0 mio Cycles (Estimated based on ideal conditions) |
Wire Mounting | Eyelet |
Max. Wire Exit Angle | ±3° |
Technology | Magnetic (≤ 0.09°) |
Accuracy | ± 0.10 % Full Scale Output |
Repeatability | ±0.05 % FSO |
Resolution Singleturn | 13 bit |
Resolution Multiturn | 4 bit |
Approx. Linear Resolution | 24.4 µm |
Code | Analog Voltage 0 – 5 V |
Resolution of Output | Max. 13 bits over entire measuring range (Fractional Turns - Resolution decreases less than 13 bits when measuring range is less than 90 degrees) |
Multiturn Range | 16 turn (default setting). User can use the scaling functionality to measure up to 65536 turns. |
Interface | Analog Voltage |
Manual Functions | Programmable Start and End point via Cable or Connector or Push Button |
Current Consumption | Typical 15 mA @24V (no load) |
Min. Load Resistance | 5 kΩ |
Analog Accuracy | @ 10 V = ±10 mV (with an ideal power supply) |
Settling Time | 32 ms (from min value to max value jump) |
Reverse Polarity Protection | Yes |
Short Circuit Protection | Yes |
MTTF | 257.6 years @ 40 °C |
Connection Orientation | Radial |
Connection Orientation (w.r.t Draw Wire) | Radial 3 |
Connector | Cable 2 m |
Cable Length | 2 m [79"] |
Wire Cross Section | 0.14 mm² / AWG 26 |
Material / Type | PVC |
Cable Diameter | 6 mm (0.24 in) |
Minimum Bend Radius | 46 mm (1.81") fixed, 61 mm (2.4") flexing |
Product Life Cycle | Prototype |
Signal | Color |
---|---|
Power Supply | Red |
GND | Yellow |
Analog Output | Green |
Set1/Zero Set | Brown |
Set2/DIR | White |