LINARIX Linear Sensor
LU0-AC005-0413-2T00-PRM
POSITAL
Measuring Tools & Sensors
IP64 / IP65, Draw Wire - 1 m – 2.9 m (3.28' – 9.51'), Analog - Current 4-20mA, 13 bit (8192 Steps), Draw Wire Enclosure - Machined Metal - Rectangular Housing, Connector - Radial M12, Radial 0 / Axial, Magnetic (≤ 0.09°)
Available
0
This product is a prototype
General Data Supply Voltage 8 – 32 VDC Turn On Time <500 ms Operating Temperature -30 °C (-22 °F) - +70 °C (+158 °F) Weight 1355 g (2.99 lb) Protection Class (Encoder) IP64 / IP65 EMC: Emitted Interference DIN EN 61000-6-4 EMC: Noise Immunity DIN EN 61000-6-2
Mechanical Data Max. Measurement Length 2.00 m (6.56') Length per Revolution 200 mm Wire Material Stainless Steel Wire Diameter 1.35 mm Encoder Housing Material Steel Draw Wire Housing Material Anodized Aluminium Max. Speed of Wire Displacement 8.0 m / s Max. Extension Force 15.0 N Min. Retraction Force 5.0 N Actuation Lifetime 1.0 mio Cycles (Estimated based on ideal conditions) Wire Mounting Eyelet Max. Wire Exit Angle ±3°
Sensor Data Technology Magnetic (≤ 0.09°) Accuracy ± 0.10 % FSO Repeatability ±0.05 % FSO Resolution [Encoder - Singleturn] 13 bit Resolution [Encoder - Multiturn] 4 bit Approx. Linear Resolution 24.4 µm Output Code Analog Current 4 – 20 mA Resolution of Output Max. 13 bits over entire measuring range (Fractional Turns - Resolution decreases less than 13 bits when measuring range is less than 90 degrees) Multiturn Range 16 turn (default setting). User can use the scaling functionality to measure up to 65536 turns.
Interface Communication Interface Analog Current Manual Functions Start and End point via Cable or Connector
Electrical Data Current Consumption Typical 20 mA @24 V (no load) Max Load Resistance 500 Ω Analog Accuracy @ 20 mA = ±20 µA (with an ideal power supply) Settling Time 32 ms (from min value to max value jump) Reverse Polarity Protection Yes Short Circuit Protection Yes MTTF 240.8 years @ 40 °C
Electrical Connection Connection Orientation Radial Connection Orientation (w.r.t Draw Wire) Radial 0 / Axial Connector M12, Male, 5 pin, a coded
Product Life Cycle Product Life Cycle Prototype
Connection Plan SIGNAL CONNECTOR PIN NUMBER Power Supply Connector 1 2 GND Connector 1 3 Analog Output Connector 1 1 Set1/Direction Connector 1 5 Set2/Zero Set Connector 1 4
Connector-View on Encoder
All dimension in [inch] mm. Encoder dimensions may vary depending on electrical interface and connector. This drawing and the information contained is for general presentation purposes only. Please refer to the "Download" section for detailed technical drawings.
© FRABA B.V., All rights reserved. We do not assume responsibility for technical inaccuracies or omissions. Specifications are subject to change without notice.
