POSITAL
Incorrect email or password. Please try again.
Print Send as Email

LINARIX Linear Sensor

LU0-CA01B-1213-5G00-CAW

POSITAL Measuring Tools & Sensors IP64 / IP65, Draw Wire - 3 m – 6.9 m (9.84' – 22.63'), CANopen, 13 bit (8192 Steps), Draw Wire Enclosure - Extruded Metal, Cable - Axial 1 m, Radial 0 / Axial, Magnetic (≤ 0.09°) Available 0
picture-g-3-cax-cx-nnn.png
General Data
General Data
Supply Voltage9 – 30 VDC
Power Consumption≤ 1.2 W
Operating Temperature-20 °C (-4 °F) - +80 °C (+176 °F)
Weight1480 g (3.26 lb)
Protection Class (Encoder)IP64 / IP65
EMC: Emitted InterferenceDIN EN 61000-6-4
EMC: Noise ImmunityDIN EN 61000-6-2
Mechanical Data
Max. Measurement Length5.00 m (16.40')
Length per Revolution315 mm
Wire MaterialCoated Polyamide Stainless Steel
Wire Diameter1.00 mm
Encoder Housing MaterialSteel
Draw Wire Housing MaterialAluminum
Max. Speed of Wire Displacement2.0 m / s
Max. Wire Acceleration5.0 g
Max. Extension Force16.0 N
Min. Retraction Force4.0 N
Actuation Lifetime0.5 mio Cycles (Estimated based on ideal conditions)
Wire MountingEyelet
Max. Wire Exit Angle±3°
Sensor Data
TechnologyMagnetic (≤ 0.09°)
Accuracy±0.02 % FSO
Repeatability±0.002 % FSO
Resolution [Encoder - Singleturn]13 bit
Resolution [Encoder - Multiturn]12 bit
Approx. Linear Resolution38.5 µm
Output CodeBinary
Interface
Communication InterfaceCANopen
ProfileDS-406
Programming FunctionsResolution, preset, 2 limit switches, 8 CAMS, baud rate, CAN-Identifier, bootloader, transmission modes: polled, cyclic, sync
Transmission Ratemin. 20 kBaud, max. 1 MBaud
Cycle Time Interface≥ 1 ms
Outputs
Output DriverTransceiver (ISO 11898), Galvanically Isolated by Opto-Coupl
Current Consumption≤ 70 mA @ 10 V DC, ≤ 50 mA @ 24 V DC
Reverse Polarity ProtectionYes
Short Circuit ProtectionYes
MTTF240 years @ 40 °C
Electrical Connection
Connection OrientationAxial
Connection Orientation (w.r.t Draw Wire)Radial 0 / Axial
Connection TypeCable / Connector
Cable Length1 m [39"]
Wire Cross Section0.14 mm² / AWG 26
Material / TypePVC
Cable Diameter6 mm (0.24 in)
Minimum Bend Radius46 mm (1.81") fixed, 61 mm (2.4") flexing
Product Life Cycle
Product Life CycleEstablished
Connection Plan
SIGNALCABLE COLOR
Power SupplyRed
GNDYellow
CAN HighWhite
CAN LowBrown
CAN GNDGreen
Connector-View on Encoder
Dimensional Drawing
drawing-g-3-cax-cx-cx-nnn.png
2D Drawing

All dimension in [inch] mm. Encoder dimensions may vary depending on electrical interface and connector. This drawing and the information contained is for general presentation purposes only. Please refer to the "Download" section for detailed technical drawings.

© FRABA B.V., All rights reserved. We do not assume responsibility for technical inaccuracies or omissions. Specifications are subject to change without notice.