LINARIX Linear Sensor
LU0-CA01B-1216-6E30-PRM
POSITAL
Measuring Tools & Sensors
IP64 / IP65, Draw Wire - 3 m – 6.9 m (9.84' – 22.63'), CANopen, 16 bit (65536 Steps), Draw Wire Enclosure - Machined Metal - Rectangular Housing, Connector - Radial M12, Radial 3, Magnetic (≤ 0.09°)
Available
0
General Data Supply Voltage 9 – 30 VDC Power Consumption ≤ 1.2 W Operating Temperature -20 °C (-4 °F) - +80 °C (+176 °F) Weight 955 g (2.11 lb) Protection Class (Encoder) IP64 / IP65 EMC: Emitted Interference DIN EN 61000-6-4 EMC: Noise Immunity DIN EN 61000-6-2
Mechanical Data Max. Measurement Length 6.00 m (19.69') Length per Revolution 200 mm Wire Material Stainless Steel Wire Diameter 0.60 mm Encoder Housing Material Steel Draw Wire Housing Material Aluminum / plastic Max. Speed of Wire Displacement 3 m/s Max. Wire Acceleration 2.4 g Max. Extension Force 8.0 N Min. Retraction Force 3.0 N Actuation Lifetime Not Available Wire Mounting M6 Thread Max. Wire Exit Angle ±10°
Sensor Data Technology Magnetic (≤ 0.09°) Accuracy ±0.006 % FSO Repeatability ±0.003 % FSO Resolution [Encoder - Singleturn] 16 bit Resolution [Encoder - Multiturn] 12 bit Approx. Linear Resolution 3.1 µm (theoretical), limited by mechanics Output Code Binary
Interface Communication Interface CANopen Profile DS-406 Programming Functions Resolution, preset, 2 limit switches, 8 CAMS, baud rate, CAN-Identifier, bootloader, transmission modes: polled, cyclic, sync Transmission Rate min. 20 kBaud, max. 1 MBaud Cycle Time Interface ≥ 1 ms
Outputs Output Driver Transceiver (ISO 11898), Galvanically Isolated by Opto-Coupl Current Consumption ≤ 70 mA @ 10 V DC, ≤ 50 mA @ 24 V DC Reverse Polarity Protection Yes Short Circuit Protection Yes MTTF 240 years @ 40 °C
Electrical Connection Connection Orientation Radial Connection Orientation (w.r.t Draw Wire) Radial 3 Connection Type Cable / Connector Connector M12, Male, 5 pin, a coded
Product Life Cycle Product Life Cycle Established
Connection Plan SIGNAL PIN NUMBER Power Supply 2 GND 3 CAN High 4 CAN Low 5 CAN GND 1
Connector-View on Encoder
All dimension in [inch] mm. Encoder dimensions may vary depending on electrical interface and connector. This drawing and the information contained is for general presentation purposes only. Please refer to the "Download" section for detailed technical drawings.
© FRABA B.V., All rights reserved. We do not assume responsibility for technical inaccuracies or omissions. Specifications are subject to change without notice.
