IXARC Absolute Rotary Encoder
UCD-AV004-0013-L060-AAW
POSITAL
Measuring Tools & Sensors
Analog - Voltage 0.5-9.5V, Singleturn, 13 bit (8192 Steps; 0.044°), IP64 / IP65, Aluminum / Steel, Solid Shaft - Clamping, ø 58 mm (2.28"), ø 6 mm (0.24"), Cable - Axial 10 m, ≤ 0.09° (Magnetic - Hall Effect), CE / UL
Available
0
Electrical Data | |
Supply Voltage | 8 – 32 VDC |
Current Consumption | Typical 15 mA @24V (no load) |
Start-Up Time | <500 ms |
Min. Load Resistance | 5 kΩ |
Analog Accuracy | @ 10 V = ±10 mV (with an ideal power supply) |
Linearity | 0.15% |
Settling Time | 32 ms (from min value to max value jump) |
Reverse Polarity Protection | Yes |
Short Circuit Protection | Yes |
EMC: Emitted Interference | DIN EN 61000-6-4 |
EMC: Noise Immunity | DIN EN 61000-6-2 |
MTTF | 300.9 years @ 40 °C |
Sensor | |
Technology | Magnetic |
Resolution Singleturn | 13 bit |
Resolution Multiturn | 0 bit |
Accuracy (INL) | ±0.0878° (≤ 12 bit) |
Code | Analog Voltage 0.5 – 9.5 V |
Cycle Time Base Sensor | < 100 µs |
Minimum Measurement Range | 0 – 11.25° |
Resolution of Output | Max. 13 bits over entire measuring range (Fractional Turns - Resolution decreases less than 13 bits when measuring range is less than 90 degrees) |
Multiturn Range | Singleturn |
Environmental Specifications | |
Protection Class (Shaft) | IP65 |
Protection Class (Housing) | IP66/IP67 |
Operating Temperature | -30 °C fixed (-22 °F), -5 °C flexible (+23 °F) - +80 °C (+176 °F) |
Humidity | 98% RH, no condensation |
Mechanical Data | |
Housing Material | Steel |
Housing Coating | Wet coating (RAL 9006 White Aluminium) + Cathodic corrosion protection (>720 h salt spay resistance) |
Flange Type | Clamp, ø 58 mm (L) |
Flange Material | Aluminum |
Shaft Type | Solid, Length = 10 mm |
Shaft Diameter | ø 6 mm (0.24") |
Shaft Material | Stainless Steel V2A (1.4305, 303) |
Max. Shaft Load | Axial 40 N, Radial 110 N |
Minimum Mechanical Lifetime (10^8 revolutions with Fa/Fr) | 530 (20 N / 40 N), 185 (40 N / 60 N), 130 (40 N / 80 N), 80 (40 N / 110 N) |
Rotor Inertia | ≤ 30 gcm² [≤ 0.17 oz-in²] |
Friction Torque | ≤ 3 Ncm @ 20 °C (4.2 oz-in @ 68 °F) |
Max. Permissible Mechanical Speed | ≤ 12000 1/min |
Shock Resistance | ≤ 100 g (half sine 6 ms, EN 60068-2-27) |
Permanent Shock Resistance | ≤ 10 g (half sine 16 ms, EN 60068-2-29) |
Vibration Resistance | ≤ 10 g (10 Hz – 1000 Hz, EN 60068-2-6) |
Length | 41,7 mm (1.64") |
Weight | 675 g (1.49 lb) |
Electrical Connection | |
Connection Orientation | Axial |
Cable Length | 10 m [394"] |
Wire Cross Section | 0.14 mm² / AWG 26 |
Material / Type | PVC |
Cable Diameter | 6 mm (0.24 in) |
Minimum Bend Radius | 46 mm (1.81") fixed, 61 mm (2.4") flexing |
Certification | |
Approval | CE + cULus |
Product Life Cycle | |
Product Life Cycle | Established |
Connection Plan | |
SIGNAL | CABLE COLOR |
Power Supply | Red |
GND | Yellow |
Analog Output | Green |
Set1/Direction | Brown |
Set2/Zero Set | White |
Shielding | Shield |
Connector-View on Encoder
If the drawings are not available please refer to the "Download" section.
The picture and drawing are for general presentation purposes only. All dimension in [inch] mm.
© FRABA B.V., All rights reserved. We do not assume responsibility for technical inaccuracies or omissions. Specifications are subject to change without notice.