IXARC Absolute Rotary Encoder
UCD-S101B-1616-013D-AAW
POSITAL
Measuring Tools & Sensors
SSI / SSI + Incremental - Binary, Multiturn - 16 bit (65536 rev), 16 bit (65536 Steps; 0.005°), IP68 / IP69K, Aluminum / Steel, Solid Shaft - Synchro, ø 36 mm (1.42"), ø 10 mm (0.39"), Cable - Axial 10 m, ≤ 0.09° (Magnetic - Hall Effect), CE / UL
Available
0
Interface | |
Interface | SSI with Preset |
Manual Functions | Preset + complement via cable or connector |
Interface Cycle Time | ≥ 25 µs |
Number of Preset Cycles | 5,100,000 |
SSI Format | MMMMMMMMMMMMMMMMSSSSSSSSSSSSSSSS |
Video Manual | Watch a simple installation video |
Outputs | |
Output Driver | RS422 |
Electrical Data | |
Supply Voltage | 4.5 – 30 VDC |
Current Consumption | Typical 50 mA |
Power Consumption | ≤ 1.0 W |
Start-Up Time | < 1 s |
Clock Input | RS 422, via Optocoupler |
Clock Frequency | 100 kHz – 2 MHz |
Reverse Polarity Protection | Yes |
Short Circuit Protection | Yes |
EMC: Emitted Interference | DIN EN 61000-6-4 |
EMC: Noise Immunity | DIN EN 61000-6-2 |
MTTF | 350 years @ 40 °C |
Sensor | |
Technology | Magnetic |
Resolution Singleturn | 16 bit |
Resolution Multiturn | 16 bit |
Multiturn Technology | Self powered magnetic pulse counter (no battery, no gear) |
Accuracy (INL) | ±0.0878° (≤ 12 bit) |
Code | Binary |
Environmental Specifications | |
Protection Class (Shaft) | IP68/IP69K |
Protection Class (Housing) | IP68/IP69K |
Operating Temperature | -40 °C fixed (-40 °F), -30 °C flexible (-22 °F) - +80 °C (+176 °F) |
Humidity | 98% RH, no condensation |
Mechanical Data | |
Housing Material | Steel |
Housing Coating | Cathodic corrosion protection (>720 hrs salt spray resistance) |
Flange Type | Synchro, ø 36 mm Heavy Duty |
Flange Material | Aluminum |
Shaft Type | Solid, Single Flat, Length = 20 mm |
Shaft Diameter | ø 10 mm (0.39") |
Shaft Material | Stainless Steel V4A (1.4112, 440 B), hardened |
Max. Shaft Load | Axial 180 N, Radial 180 N |
Minimum Mechanical Lifetime (10^8 revolutions with Fa/Fr) | 10 (180 N / 180 N), 15 (150 N,150 N), 30 (100 N / 100 N) |
Friction Torque | ≤ 5 Ncm @ 20 °C, (7.1 oz-in @ 68 °F) |
Max. Permissible Mechanical Speed | ≤ 6000 1/min |
Shock Resistance | ≤ 200 g (half sine 11 ms, EN 60068-2-27) |
Permanent Shock Resistance | ≤ 30 g (half sine 16 ms, EN 60068-2-29) |
Vibration Resistance | ≤ 30 g (10 Hz – 1000 Hz, EN 60068-2-6) |
Length | 56 mm (2.20") |
Weight | 1060 g (2.34 lb) |
Electrical Connection | |
Connection Orientation | Axial |
Cable Length | 10 m [394"] |
Wire Cross Section | 0.34 mm² / AWG 22 |
Material / Type | PUR / PU |
Cable Diameter | 7.5 mm (0.30 in) |
Minimum Bend Radius | 56 mm (2.2") fixed, 75 mm (3") flexing |
Product Life Cycle | |
Product Life Cycle | Established |
Connection Plan | |
SIGNAL | CABLE COLOR |
Power Supply | Brown |
GND | White |
Data+ | Gray |
Data- | Pink |
Clock+ | Green |
Clock- | Yellow |
Preset | Blue |
DIR | Red |
Shielding | Shield |
If the drawings are not available please refer to the "Download" section.
The picture and drawing are for general presentation purposes only. All dimension in [inch] mm.
© FRABA B.V., All rights reserved. We do not assume responsibility for technical inaccuracies or omissions. Specifications are subject to change without notice.