POSITAL
Incorrect email or password. Please try again.
Print Send as Email

LINARIX Linear Sensor

LU0-S101B-1216-9A-2RW

POSITAL Measuring Tools & Sensors IP54, , SSI / SSI + Incremental - Binary, 16 bit (65536 Steps), , Cable - Radial 2 m, Radial 9, Magnetic (≤ 0.09°) Available 0
This is a discontinued product!
General Data
General Data
Supply Voltage4.5 – 30 VDC
Power Consumption≤ 1.0 W
Turn On Time< 1 s
Operating Temperature-30 °C fixed (-22 °F), -5 °C flexible (+23 °F) - +80 °C (+176 °F)
Weight365 g (0.80 lb)
Protection Class (Encoder)IP54
EMC: Emitted InterferenceDIN EN 61000-6-4
EMC: Noise ImmunityDIN EN 61000-6-2
Mechanical Data
Mechanical Data
Mechanical Data
Mechanical Data
Mechanical Data
Encoder Housing MaterialSteel
Sensor Data
TechnologyMagnetic (≤ 0.09°)
Resolution [Encoder - Singleturn]16 bit
Resolution [Encoder - Multiturn]12 bit
Approx. Linear Resolution16 bit (65536 Steps/0.005°)
Output CodeBinary
Interface
Communication InterfaceSSI with Preset
Manual FunctionsPreset + complement via cable or connector
Cycle Time Interface≥ 25 µs
Outputs
Output DriverRS422
Current ConsumptionTypical 50 mA
Clock InputRS 422, via Optocoupler
Clock frequency100 kHz – 2 MHz
Reverse Polarity ProtectionYes
Short Circuit ProtectionYes
MTTF350 years @ 40 °C
Electrical Connection
Connection OrientationRadial
Connection Orientation (w.r.t Draw Wire)Radial 9
ConnectorCable 2 m
Cable Length2 m [79"]
Wire Cross Section0.14 mm² / AWG 26
Material / TypePVC
Cable Diameter6 mm (0.24 in)
Minimum Bend Radius46 mm (1.81") fixed, 61 mm (2.4") flexing
Product Life Cycle
Product Life CycleDiscontinued
Connection Plan
SIGNALCABLE COLOR
Power SupplyBrown
GNDWhite
Data+Gray
Data-Pink
Clock+Green
Clock-Yellow
PresetBlue
DIRRed
ShieldingShield
Dimensional Drawing
2D Drawing

All dimension in [inch] mm. Encoder dimensions may vary depending on electrical interface and connector. This drawing and the information contained is for general presentation purposes only. Please refer to the "Download" section for detailed technical drawings.

© FRABA B.V., All rights reserved. We do not assume responsibility for technical inaccuracies or omissions. Specifications are subject to change without notice.