LINARIX Linear Sensor
LU0-S101G-1213-2T00-PRQ
POSITAL
Measuring Tools & Sensors
IP64 / IP65, Draw Wire - 1 m – 2.9 m (3.28' – 9.51'), SSI / SSI + Incremental - Gray, 13 bit (8192 Steps), Draw Wire Enclosure - Machined Metal - Rectangular Housing, Connector - Radial M12, Radial 0 / Axial, Magnetic (≤ 0.09°)
Available
0
This product is a prototype
General Data Supply Voltage 4.5 – 30 VDC Power Consumption ≤ 1.0 W Turn On Time < 1 s Operating Temperature -30 °C (-22 °F) - +70 °C (+158 °F) Weight 1315 g (2.90 lb) Protection Class (Encoder) IP64 / IP65 EMC: Emitted Interference DIN EN 61000-6-4 EMC: Noise Immunity DIN EN 61000-6-2
Mechanical Data Max. Measurement Length 2.00 m (6.56') Length per Revolution 200 mm Wire Material Stainless Steel Wire Diameter 1.35 mm Encoder Housing Material Steel Draw Wire Housing Material Anodized Aluminium Max. Speed of Wire Displacement 8.0 m / s Max. Extension Force 15.0 N Min. Retraction Force 5.0 N Actuation Lifetime 1.0 mio Cycles (Estimated based on ideal conditions) Wire Mounting Eyelet Max. Wire Exit Angle ±3°
Sensor Data Technology Magnetic (≤ 0.09°) Accuracy ± 0.10 % FSO Repeatability ±0.05 % FSO Resolution [Encoder - Singleturn] 13 bit Resolution [Encoder - Multiturn] 12 bit Approx. Linear Resolution 24.4 µm Output Code Gray
Interface Communication Interface SSI with Preset Manual Functions Preset + complement via cable or connector Cycle Time Interface ≥ 25 µs
Outputs Output Driver RS422 Current Consumption Typical 50 mA Clock Input RS 422, via Optocoupler Clock frequency 100 kHz – 2 MHz Reverse Polarity Protection Yes Short Circuit Protection Yes MTTF 350 years @ 40 °C
Electrical Connection Connection Orientation Radial Connection Orientation (w.r.t Draw Wire) Radial 0 / Axial Connector M12, Male, 8 pin, a coded
Product Life Cycle Product Life Cycle Prototype
Connection Plan SIGNAL CONNECTOR PIN NUMBER Power Supply Connector 1 2 GND Connector 1 1 Data+ Connector 1 5 Data- Connector 1 6 Clock+ Connector 1 3 Clock- Connector 1 4 Preset Connector 1 7 DIR Connector 1 8 Shielding Connector 1 Connector Housing
Connector-View on Encoder
Rotation Clockwise (seen on shaft)
All dimension in [inch] mm. Encoder dimensions may vary depending on electrical interface and connector. This drawing and the information contained is for general presentation purposes only. Please refer to the "Download" section for detailed technical drawings.
© FRABA B.V., All rights reserved. We do not assume responsibility for technical inaccuracies or omissions. Specifications are subject to change without notice.
