POSITALMeasuring Tools & SensorsProgrammable HTL/TTL - Default Push-Pull (HTL), Cable - Radial 5 m, A, B, Z, /A, /B, /Z, IP64 / IP65, Aluminum / Steel, Solid Shaft - Clamping, ø 58 mm (2.28"), ø 10 mm (0.39")Available0
Interface
Interface
Programmable Incremental
Programming Functions
PPR (1-32768), Output, Counting Direction
Configuration Tool
Configuration Tool: UBIFAST Configuration Tool (Version < 1.6.10), If PPR above 16384 is required, this and all additional setups must be adjusted during production.
Outputs
Output Driver
Push-Pull (HTL)
Output Voltage High Level Push-Pull (HTL)
> 4 V @ 4.75-9 V Supply Voltage > V-3 V @ 9-30 V Supply Voltage
Output Voltage Low Level Push-Pull (HTL)
< 0.5 V
Output Voltage High Level RS422 (TTL)
> 4 V
Output Voltage Low Level RS422 (TTL)
< 0.5 V
Maximum Frequency Response
1 MHz
Maximum Switching Current
50 mA per Channel
Electrical Data
Supply Voltage
4.75 – 30 VDC
Current Consumption
≤60 mA @ 5V DC, ≤30 mA @ 10V DC, ≤25 mA @ 24V DC
Power Consumption
≤ 1.0 W
Start-Up Time
< 1 s
Min. Load Resistance
120 Ω
Reverse Polarity Protection
Yes
Short Circuit Protection
Yes
EMC: Emitted Interference
DIN EN 61000-6-4
EMC: Noise Immunity
DIN EN 61000-6-2
MTTF
280 years @ 40 °C
Sensor
Technology
Magnetic
Accuracy (INL)
±0.0878° (≤ 12 bit)
Duty Cycle
180° ± 12° (Speed > 100RPM)
Phase Angle
90° ± 6° (Speed > 100RPM)
Environmental Specifications
Protection Class (Shaft)
IP65
Protection Class (Housing)
IP66/IP67
Operating Temperature
-30 °C fixed (-22 °F), -5 °C flexible (+23 °F) - +80 °C (+176 °F)
Humidity
98% RH, no condensation
Mechanical Data
Mechanical Data
Housing Material
Steel
Housing Coating
Wet coating (RAL 9006 White Aluminium) + Cathodic corrosion protection (>720 h salt spay resistance)
Flange Type
Clamp, ø 58 mm (L)
Flange Material
Aluminum
Shaft Type
Solid, Single Flat, Length = 20 mm
Shaft Diameter
ø 10 mm (0.39")
Shaft Material
Stainless Steel V2A (1.4305, 303)
Max. Shaft Load
Axial 40 N, Radial 110 N
Rotor Inertia
≤ 30 gcm² [≤ 0.17 oz-in²]
Friction Torque
≤ 3 Ncm @ 20 °C (4.2 oz-in @ 68 °F)
Max. Permissible Mechanical Speed
≤ 12000 1/min
Shock Resistance
≤ 100 g (half sine 6 ms, EN 60068-2-27)
Permanent Shock Resistance
≤ 10 g (half sine 16 ms, EN 60068-2-29)
Vibration Resistance
≤ 10 g (10 Hz – 1000 Hz, EN 60068-2-6)
Length
52,7 mm (2.07")
Weight
885 g (1.95 lb)
Minimum Mechanical Lifetime (10^8 revolutions with Fa/Fr)
430 (20 N / 40 N), 150 (40 N / 60 N), 100 (40 N / 80 N), 55 (40 N / 110 N)
